Description
265x101x84(mm)
10.43×3.98×3.31(inch)
10.43×3.98×3.31(inch)
VOLTAGE: 90 ~ 264 VAC FULL RANGE.
FREQUENCY: 47 ~ 63 Hz.
INPUT CURRENT: 4A (RMS) FOR 230 VAC
8A (RMS) FOR 115 VAC
INRUSH CURRENT: 35A MAX. FOR 115 VAC PER MODULE
40A MAX. FOR 230 VAC PER MODULE
POWER FACTOR CORRECTION: PFC CAN REACH THE
TARGET OF 95% AT 230V, FULL LOAD
FREQUENCY: 47 ~ 63 Hz.
INPUT CURRENT: 4A (RMS) FOR 230 VAC
8A (RMS) FOR 115 VAC
INRUSH CURRENT: 35A MAX. FOR 115 VAC PER MODULE
40A MAX. FOR 230 VAC PER MODULE
POWER FACTOR CORRECTION: PFC CAN REACH THE
TARGET OF 95% AT 230V, FULL LOAD
| Output Voltage | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 0.5 | 24 | ±5% | ±1% | 70mV |
| +12V | 1.0 | 40 | ±5% | ±1% | 120mV |
| -12V | 0 | 0.8 | ±5% | ±1% | 120mV |
| +3.3V | 0 | 24 | ±5% | ±1% | 70mV |
| +5VSB | 0 | 3.5 | ±5% | ±1% | 70mV |
‧TEMPERATURE RANGE: OPERATING 0℃ ~ 50℃, STORAGE –20℃ ~ 80℃
‧HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
‧EFFICIENCY: 80% TYPICAL AT 115VAC, FULL LOAD
‧POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
‧OVER POWER PROTECTION
‧OVER VOLTAGE PROTECTION
‧OVER CURRENT PROTECTION
‧SHORT CIRCUIT PROTECTION
‧SAFETY: TO MEET UL, TUV, CB
‧EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A
‧3.3V REMOTE SENSING
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.